GTJZ0612&0812&1012&1212 Operation Manual
3-9
© Jul 2020
BATTERY HAZARDS
FIRE AND EXPLOSION HAZARD
•
Batteries contain sulfuric acid and
generate explosive mixtures of
hydrogen and oxygen gases.
Keep any device that may cause
sparks or flames (including
cigarettes/smoking materials)
away from the battery to prevent
explosion.
•
Do not touch the battery terminals
or cable clips with tools that may
cause sparks.
BATTERY HAZARD
Always wear protective glasses or
goggles and protective clothing
when working with batteries. Remove
all rings, watches and other
accessories.
CHEMICAL BURN HAZARD
Avoid spilling or contacting battery
acid with unprotected skin. Seek
medical attention immediately if
battery acid contacts skin.
BATTERY HAZARD
•
Do not use any battery charger
greater than 24VDC to charge the
battery. Only connect the charger
to a grounded three-wire AC
outlet. Be sure the charger is in
proper operating condition before
using.
•
Be sure to use the appropriate
number of personnel and proper
lifting methods when changing
the battery.
NOTICE
After charging the battery, be sure that:
•
The battery cable connections are free of
corrosion.
•
The battery hold-down and cable connections are
secured.
Adding terminal protection and anti-corrosion
sealants will help reduce corrosion of the battery
terminals and cables.
CHARGING THE BATTERY
•
Do not expose the battery or charger to water or rain
during charging.
•
Keep a charging battery away from direct sunlight.
•
Always charge the battery using the charger
supplied by the manufacturer.
HANDLING THE BATTERY
•
Only trained personnel with permission from the
workplace may remove a battery from a machine.
•
Never force a battery during installation or removal.
Never drop a battery.
•
Never short-circuit the outlet of the battery pack
directly with the wire.
•
If battery acid spills, use water mixed with
bicarbonate (baking soda) to neutralize the acid.
•
Do not store batteries in wet places or in water.
•
Check the wire for damage daily. Replace any
damaged parts before operation.
WELDING AND POLISHING
REQUIREMENTS
Before welding, grinding and polishing operations, al-
ways ensure you read and understand all operation and
maintenance requirements in this manual and the
Main-
tenance Manual
.
Содержание GTJZ0612
