sinercom LION100K, Руководство пользователя

Страница: 7 / 46

4
Basic Features:

PWM and IGBT technology

Pure sinusoidal output wave form and true on-line topology
 High input power factor (IGBT rectifier), Input current limiting

Low input current THD (IGBT rectifier)

Low output voltage THD
 High AC/AC and DC/AC efficiency (up to 94%)
 3 separate DSP (Digital Signal Processor) control

Cold-start feature

Static By-Pass feature: Provides uninterruptable transfer to bypass source in case of overload
or UPS fault.
 Bypass leakage current sense system

Maintenance bypass switch and warning system, by-pass short circuit protection

Separate bypass input facility (split bypass), generator operation sense input
 LCD alphanumeric display panel providing battery, load, voltage, power and status information
in detail to user

Improved diagnostics and correct fault infor mation

Up to 192 event memory record system (7000 alarms or warnings total)
 Real time clock and calendar system
 Overload operation 10 minutes at 100% - 125% load, 1 minute at 125% - 150% load

Output overload, over-current and short circuit protection, output current limiting

Reliable operation at even 100% unbalanced load condition
 Non-linear load supply feature (CF 3:1)
 Double polarity battery (with common terminal)

Automatic and manual battery test and battery temperature compensation features

3 separate maintenance clock counters
 Battery charge with current limiting
 Automatic and manual boost charge feature
 Battery deep discharge protection

Temperature protection with 3 separate sensors
 Interactive communication

Diagnostic and settings with PC ability

2 separate RS232 communication ports (standard)
 Multi UPS monitoring on same communication line by RS485 (optional)
 4 dry contact alarm relay outputs as standard (8 optional relay outputs)
 Improved remote monitoring panel system (optional)

RS232 port multiplexer (optional)
 Direct network connection with optional SNMP support
 MODBUS Adapter (optional)
 AT command set definitions for dump modems

Communication via Windows based T-MON software and remote monitoring and control of UPS
via modem
 Optional softwares compatible for most computer platforms
 Ability for labeling of UPSs by users

Emergency power-off support
 Conformity to international and local standards
 AC input and output filters
 Optional graphic front panel

CE compliance
 Input, bypass and load phase order protection
 Optional leakage current alarm system

Input and output isolation transformers (optional)
 Enhanced accessory options
 100.000 hours MTBF
 2 years system warranty

10 years spare parts warranty