sinercom LION100K, Руководство пользователя

Страница: 41 / 46

38
VI. FAULTS AND TROUBLESHOOTING
6.1 General Procedure For Fault Checking And Troubleshooting
UPS contains complicated electronic control circuits. In order to locate any fault occurring circuits, an advanced
knowledge about the circuitry and its operation principles must be known. The aim of this section is to give the
knowledge required at the first intervention.
There is no practical way to locate any possible fault. Most of the faults do not occur as a performance decrement.
Generally, the UPS operates normally or switches into by-pass mode. But in order to determine any change in
load or the system the parameters must be recorded regularly as mentioned previously.
Generally, the output voltage can deviate %2 from the predefined values. If values differ more than this percentage
then reasons must be investigated.
The following general structure must be systematically followed while trying to indicate the error:
Fault determination: First step is to record the messages, indicator panel LEDs, operating parameter
values and last status of switches. This must be done before
Fixing interventions: After recording all indications, check the meaning of the fault and alarm
messages using “The operator control indicator panel”. If anything related, follow the related procedure.
Reporting the fault:
Service personal must clearly report the work done. Hence, if any other error
occurs there will be enough information to fix it.
6.2 Before Calling Service
Please check and note the following:
1-
Did you read the user manual carefully and applied the procedures accordingly?
2- Are the switches and circuit breakers of UPS in their normal position?
3- Is there electric power at the UPS line connection distribution panel?
4- Did you turn the battery switch on (to “1“ position) when UPS started to operate in normal mode?
5- Which of the warning lights on front panel is (are) on?
6- Is there any change in the load level at the output of UPS?
7- Did any overload condition happen or not?