Sindoh A610 Series, Руководство по обслуживанию

Страница: 39 / 218

35
Paper Feed (A610DN)
Overview
The printer is installed with a 250 sheets of A4 cassette Tray with 75gsm as base and a
bypass tray as the base and 250 sheet feeding unit can be added optionally.
A friction pad method is used as paper separating method for main tray and a paper
detecting sensor is mounted to determine paper presence, but a separate auto paper size
detecting sensor is not installed, which allows the printer to detect the paper size by on-off
timing of Resist sensor.
When loading papers to main tray, adjust the side fences and rear fence to prevent gaps in
the cassette.
For thick papers (28lb, 105g/m
2
) and special papers, there is a load limit line indication.
Main Tray Components and Feeding and Separating Mechanism
Main Tray consists of the following 6 components. Role of each component is specified
below.
1) Base Plate: In the cassette tray for loading paper. It lifts paper in the tray with the
pickup roller of the main body and applies adequate pressure between the roller
and paper.
2) Left and Right Side Fences: Aligns the loaded papers to its size.
3) Rear Fence: Aligns the rear side of loaded papers to its size.
Move the rear fence lever to adjust.
4) Rear Fence Expanding Lever: Used to expand the rear fence when loading legal
papers.
5) Separation Friction Pad
A’ssy: Separates sheets fed from tray one by one
.
6) Base Plate Pad: Holds the bottom paper down and separates sheets to prevent
several sheets being fed at once when low on paper.