Sindoh A610 Series, Руководство по обслуживанию

Страница: 204 / 218

200
When solenoid test starts, 3 solenoids listed above are turned on at the same time and
turned off after 2 seconds.

T1 Motor Test
This is a test for determining whether Tray 1 Pickup DC motor installed in the main body is
working properly.
You can check the following motor in Tray 1 Motor Test Mode:
-
Tray1 Pickup DC motor
To perform Tray 1 Motor Test:
1. Select HARDWARE TEST in Diagnosis Mode.
2. Select T1 motor test. (Entered Tray 1 Motor Test Mode. Test begins)
Once Tray 1 Motor Test begins, Tray1 Pickup DC motor is turned ON, then OFF
automatically after 1 second.

T2 Motor Test
This is a test for determining whether Tray 2 Pickup DC motor installed in the main body is
working properly.
You can check the following motor in Tray 2 Motor Test Mode:
-
Tray2 Pickup DC motor
-
Tray2 Transport motor
To perform Tray 2 Motor Test:
1. Select HARDWARE TEST in Diagnosis Mode.
2. Select T2 motor test. (Entered Tray 2 Motor Test Mode. Test begins)