English-18
Simrad Marine TV
5. The display interchanges between
New Sat
and
Search?
.
6. Confirm with , or abandon with .
7. If you chose ‘abandon’, the display will briefly show
cancel
and then
return to the setup menu i.e.
New Sat
, continue from point 2. If you chose
‘confirm’, the search mode is activated and the display shows
scanning
(flashing). The search mode can be interrupted at any time by pressing ,
which brings you back to the main menu. The display shows
Setup
(flash-
ing).
8. If the tracking system has scanned the whole area without locating a satellite,
the display shows
scanning
interchanging with
complete
. Confirm with
.
You are back in the main menu with
Setup
flashing. Before restarting the
search mode (see point 1), check if there is a clear view to the satellite, if the
program selected on the receiver is o.k. (possibly change to another program)
and if the respective satellite can be received in this area!
If no satellite is found, repeat the search in another band (see point 3).
Before you restart the search-mode, make sure that no superstructures
obstruct the view to the satellite!
9. The search mode stops after a satellite is found. The display shows
Sat ok?
(flashing). Check the quality of the TV picture! In case there
is no picture or the wrong TV program, proceed with the search mode by
pressing repeatedly until the correct TV program is found. Press
to
confirm.
10. The display shows
Save as?
just for a brief moment.
11. A list of the different storage positions is shown. Use the key to toggle
between
Sat 1
and
Sat 4
, confirm with
.
Note! Only free storage positions are shown. Every receiver supporting
the DiSEqC™ function, allocates the satellite positions to one of the
DiSEqC™ positions 1 – 4. Therefore, make sure that all satellites in the
DiSEqC™ menu of the receiver and of the antenna unit are stored under the
same number! This allows the use of the
Auto Sat
function (see section
4.4.2).
Example: Satellite Astra is stored under DiSEqC™ position 2 in the
receiver, meaning that this satellite has to be stored in the antenna unit
under
Sat 2
! Receivers which do not support the DiSEqC™ function
will allow any order of numbers. Press
.
Содержание TV45
