Simrad TV45, Руководство пользователя

Страница: 24 / 176

English-24 Simrad Marine TV
5.2 Adjustment of the LNB type
In order to change the LNB type, follow the below procedure:
1. To go to the setup menu, press repeatedly until the display shows
Setup
(flashing), then press , Enter password, see section 1.5. If the password
is correct you are in the Setup menu with the display:
Tracking
.
2. Press repeatedly until
LNB Type
appears. Press to confirm.
3. The display will show the standard setting
lin 0
which is valid for
Europe. By pressing the key you can change the LNB settings. Press
to confirm. The display will return to:
LNB Type
.
The standard setting
lin 0
is the only one supported by a standard system.
Reception from satellites with a rotated skew will require an optional LNB
mounting with variable skew (see Appendix D). Reception from circular
polarized satellites will require a circular LNB type.
4. Press repeatedly until the legend
quit
appears, then press . The dis-
play shows
Setup
(flashing).
You are now back in the main menu and can switch to other satellites by press-
ing the key or make adjustments in the setup menu.
5.3 Special functions via the standby mode
The following information can be obtained via the standby mode: software ver-
sion of antenna unit and control unit, serial number and operating hours counter.
1. Turn on the control unit. The display shows
Init
, meaning initialization is
started. Wait for the initialization to be completed, and then press the key
to enter standby mode.
2. To obtain the special functions, press and hold the while toggling
between the following functions with the key:
• serial number.
• operating hours counter.
• software version of the antenna unit:
VA X-XX
• software version of the control unit:
VC X-XX
3. After releasing the key, the display returns to
Standby
.