Simrad RI35 Mk2 Rudder Angle Indicator
4
20220919D
Input signal: ........................................................Frequency 3400 Hz (midship reference),
±20Hz/degree, polarity independent.
Current: 0.1 - 1.1mA (midship 0,6mA), polarity independent
NMEA 0183 RSA (min. 10 Hz): $--RSA,x.x,A,x.x,A*hh<cr><lf>
Output signal: ............................. NMEA 0183 RSA 20Hz: $--RSA,xx.x,A,,*hh<cr><lf>
Accuracy:........................................................................................ ±0.5° (Indicator alone)
Cable:................................................................ 20 m, single twisted pair (not connected).
Rudder Feedback Units: ............................................ RF300, RF300S (frequency signal),
RF45X (current or frequency signal),
RF100 (current signal).
Figure 2-1 RI35 Mk2 Dimensions
3.
INSTALLATION
The RI35 Mk2 is designed for flush, bulkhead or bracket mounting, and
should be positioned in a location in clear view of the helmsman. When
the mounting location is determined, the cables should be connected to
RI35 Mk2 before the unit is mounted. Cables may be taken out
underneath, or in the back of the RI35 Mk2.
