Simrad RI35 Mk2 Rudder Angle Indicator
12
20220919D
3.4
Bracket mounting
•
Mount two of the bracket halves to the RI35 Mk2.
•
Temporarily bolt together the other two halves of the bracket to the
first two halves.
•
Hold the RI35 Mk2 in place by hand and mark the 4 holes for the
fixing screws on the mounting surface.
•
Remove the RI35 Mk2, drill the 4 mounting holes in the mounting
surface.
•
Unbolt the temporarily fitted bracket halves and secure them to the
mounting surface using the self-tapping screws.
•
Assemble the complete bracket again and adjust the RI35 Mk2 to
best viewing angle and tighten up the mounting bracket bolts.
Figure 3-12 RI35 Mk2 Bracket mounting
3.5
Illumination
Internal LED’s illuminates the scale. The illumination is turned on and
adjusted in three steps by the front panel keypad.
