Simrad Maris ECDIS900, Руководство по установке

Страница: 15 / 64

Page 15
MARIS ECDIS900 Installation Manual
DATAGRAM TYPES
All UDP multicast datagrams used in the ECDIS900 contain one of the following strings,
followed by a null character (all bits set to zero) as the first six bytes of the datagram:
•
" RaUdP" for transmission of binary file e.g., screen dump to VDR.
•
"RrUdP" for transmission of retransmittable binary files e.g., route transfer to and from
the ECDIS900.
BRIDGE ALERT MANAGEMENT INTERFACES
The system supports Bridge Alert Management (BAM). The ECDIS900 uses a communication
protocol based on an interface using a series of sentences: ALF, ALC, ACN, ARC and HBT.
The interface for alerts complies with the IEC 61162-1 standard.
ALERT LIST
The alerts can be category A or category B.
Alert type abbreviations:
•
A: Alarm
•
C: Caution
•
W: Warning
Category A alerts
Information Type
Crossing safety contour A
Crossing area with special conditions (selectable) C or W
Crossing navigational hazards C
Deviation from route A
Approach to critical point A or W
CPA/TCPA A
AIS target processing/display capacity is about to be exceeded C
AIS target processing/display capacity have been exceeded W
Outside anchor watch area (escalation) A or W
User-defined alarm A
Course change (TCS) A
Back-up Navigator (TCS) A
End of track alert (TCS) W