Simrad IS80 Heading Repeater HR80, Руководство пользователя

Страница: 14 / 30

Operation | 13
3 Operation
Turning the WI80 on
WI80 has no power key, and will be running as long as
power is connected.
When power is applied to the system the display will
indicate the active mode as shown in the table.
MODE
LED POINTER
Initial After 1 second
Relative
Actual wind
speed according
to active mode
Wind direction
according to
active mode
True
Geographic
After approximately 3 seconds the instrument is
operative.
Default: Relative wind
Before the instruments is ready to operate the default
settings should be checked and changed if other values
are preferred. Refer to the Changing the default settings
chapter.
Using the keys
The instrument is operated by the 2 keys on the front.
They are used to switch between display modes, to set
values and to adjust the illumination as illustrated in the
table on the next page.
Key presses or key combinations not indicated in the
table have no effect.
Refer also to Operation flow chart.