manualshive.com logo in svg

Simrad FS70 -, Руководство оператора, Страница: 54 / 114

Поделиться
Скачать
Simrad FS70 - Скачать руководство пользователя страница 54

FS70 Trawl Sonar System 

44

 

 

  974-24007001/5.0 

 

 

3.2.7.5

 

Users Settings Control Panel Tab 

 

 

 

The main “Users” control panel allows you to set the settings for the active sonar based on 
previously saved settings. To change the setting, just left or right click the mouse over the 
button you have selected, move the mouse up or down until the desired button is 
highlighted and click the left mouse button or right mouse button to activate the new 
setting. 

NOTE:  When you “Save Setting” you automatically save the setting for both the 
vertical and the sounder at the same time.

 

3.2.7.6

 

Sensors Control Panel Tab 

The main “SENSORS” control panel allows you to select the sensors you want to setup. To 
change the value of the system parameter just left or right click the mouse over the button 
you have selected, move the mouse up or down until the desired button is highlighted and 
click the left mouse button or right mouse button to activate the new setting. 

 

Содержание FS70 -



















































































































Отзывы:

Нет отзывов