Simpro Multi-Tip MT1200, Руководство пользователя

Страница: 22 / 48

3.4.4 Battery charger
The Multi-Tip is fitted with a digital smart charger which accepts 1-phase mains power at
voltages of 85-264VAC and frequencies of 50/60Hz, with a maximum current draw of 3 Amps.
The charger outputs up to 6 Amps of continuous direct current at 27.2 Volts, for a maximum
power output of 160 Watts.
The battery charger is in an enclosed plastic case and is protected against short-circuit,
current overload, over-voltage, and over-temperature.
3.4.5 Charging lead
The Multi-Tip uses an IEC C13 charging lead, which connects to the IEC C14 socket on the
side of the machine. IEC leads are used for many computer accessories and are widely
available from electronics stores. T
he e s e es c e “c e c s”.
3.4.6 Emergency stop
From 2022, the Multi-Tip is fitted with an Emergency Stop button beside the charging socket.
This button disconnects battery from the electrical systems, and should be depressed if the
machine is to be placed in storage, or any time the powerpack cover needs to be removed.
Multi-Tips produced prior to 2022 with fitted with a battery-isolator switch with a red key.
On certain versions, the battery will not charge if the isolator switch is turned OFF.
3.4.7 Circuit breaker
The Multi-Tip is fitted with an auto-resetting 75A circuit breaker on the battery cable to
protect the electrical systems from excessive current draw. Once triggered, the circuit
breaker will automatically reset after a period of 1-2 minutes.
Because the current draw of the motor increases as the battery voltage decreases,
operating the Multi-Tip with a flat battery may trip the circuit breaker.
Prior to 2022, the Multi-Tip was fitted with a 120A Maxi blade fuse instead of a
circuit breaker. Replacement fuses are available from Simpro and most auto-parts stores.
3.4.8 Solar panel
If you do not operate a machine with a solar panel, please disregard this section.
Battery machines may be fitted with a solar panel kit to allow operation in locations without
mains power. The 80W monocrystalline solar panel (dimensions 930x673x35mm) is mounted
on an adjustable steel bracket at the top of the mast, and delivers power to the battery via
a 12V/24V digital regulator.
As set out in §1.5 , in ideal conditions the solar panel provides enough power to dump about
2,000kg of material each day, which is equivalent to about 20 full 240-litre wheelie bins. There
are many factors affecting this figure, including the season, the amount of sunlight available,
cloud cover, panel alignment and cleanliness, and the condition of the battery.
To deliver maximum power the solar panel must be correctly aligned, clean, and
exposed to direct sunlight throughout the day.
24V Charger 0390050006 12V Charger 0410050039
NZ/AU 0790050218 UK 0790050103 US 0790050008
0790050393
0790050374
0790050107
24V Solar Kit 0090040076 24V Panel Only 0250050530 Regulator 0250050462