REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 3 |
The BOSS.6 Enclosure is intended for the housing and wiring of up to six (6) PHI 3.8, 3.5 or 3.4 kWh deep-
cycle Lithium Ferro Phosphate (LFP) batteries, or up to six (6) PHI 2.9, 2.7 or 2.6 kWh LFP batteries. The
Enclosure may be used with the AccESS or ExprESS fully integrated units, or as a PHI Battery enclosure for
any other installation with SimpliPhi compatible equipment.
When the BOSS.6 Enclosure is used with the AccESS or ExprESS fully integrated units, the additional
Enclosure containing additional PHI batteries allows for an increased amount of available energy storage
capacity, beyond the PHI Batteries already included in the fully integrated AccESS or ExprESS units.
All PHI batteries must be fully charged BEFORE commissioning. Failure to do so will Void
the Warranty.
As outlined
PHI Battery Installation Manual
batteries must always be connected in parallel (Positive
to Positive / Negative to Negative). Any bussing used within the BOSS.6 Enclosure must be used to parallel
the batteries only; no series connections are permitted and will destroy PHI batteries and Void the
Warranty. More detailed connection instructions are included in later sections of this manual.
2.3 - Specifications
Review Table 1 below for BOSS.6 Enclosure specifications, including physical dimensions, Warranty period
and technical data.
Table 1 – BOSS.6 Enclosure Specifications
BOSS.6 Enclosure
WEIGHT
270 lbs. (122.5 kg.) Without Batteries
DIMENSIONS
36” W x 36”H (40” w/feet) x 16” D /
91.4 cm W x 91.4 cm H (101.6 cm w/feet) x 40.64 cm D
Содержание BOSS.6
Страница 1: ...SIMPLIPHI POWER INC REV020620...