REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 12 |
(1)
Cables are not included, but recommendations as outlined in Table 3 of this Manual may
be purchased directly from SimpliPhi. Otherwise, the installer may size busbar-to-terminal
block cables according to the number of batteries connected in parallel and in accordance
with local codes and purchase separately.
(2)
When busbars are ordered from SimpliPhi or from a SimpliPhi distributor, they will come
with the 3/8” flat washers, 3/8” lock washers and 3/8”-16½”-long brass hex head screws
needed to secure cables to the ends of the busbars. These connections should tighten to a
torque value of 120 in-lbs.
b)
Secure the cable lug(s) to the negative 5-point terminal block using a 7/16” wrench socket to
tighten the ¼”-20 nut(s). The cables should include 3/8” lugs to fit onto the 3/8” posts on the 5-
point terminal block.
11.
Wire the positive interconnecting busbar(s) to the built-in positive 5-point terminal block.
i)
Secure a cable (not provided) to each positive interconnecting busbar.
Содержание BOSS.6
Страница 1: ...SIMPLIPHI POWER INC REV020620...