Simplex SafeLINC 4020-0160, Инструкция по установке и эксплуатации

Страница: 41 / 58

35
This section describes how to set up the SafeLINC FPII for sending email.
To set up the system for sending email, click the Email Configuration item on the Administration
menu. Then follow the instructions below.
To configure the system for email:
1.
Use the MIS/IT Configuration Worksheet to enter information into the configuration fields
(see Figure 32).
Note: The SMTP Port is not configurable and is fixed at 25.
Figure 32. Applicable Portion of Configuration Program
2.
Click the Send Test Email hotlink to test your configuration. Click Send Test Email on the
verification dialog. Check the mail account for where the email address receives mail to
verify that you received the test email. You may need to click on Send/Receive in your email
client to get the new email.
Notes:
•
Your browser may display any problems with the SafeLINC FPII sending the test
email message. You may also view the messages in the Diagnostic Port.
•
You also can use the email log feature under the system menu to help you in
configuring email properly.
Figure 33. Test Email Box
Email Configuration
Overview
Configuring
SafeLINC FPII Email