Compact Auto FuelPort Installation
-
6
III. COMPACT AUTOMATIC FUELPORT
III-A. INSTALLATION
1.
Welded to a fuel tank
2.
Attached to a post
3.
Placed in a stand
4.
Flush mounted into a wall
-
See AFC Controller
The Compact Automatic Fuelport
can be installed in three ways:
Weld Brackets
Post
Stand
Welding FuelPort to Tank:
You can mount the FuelPort directly on a
storage tank by welding two mounting
brackets to the tank and bolting the
FuelPort to them. (See
Weld Brackets
)
Follow all necessary safety procedures
when welding the brackets to your tank.
Simplex is not responsible for damages or
injuries sustained due to improper safety
precautions.
Attaching CAFP to Post:
With the post mounting option, the CAFP
can be attached to a free-standing post.
(See
Post
)
To do so, attach the post to a concrete pad
and use the supplied U-bolt post brackets
to attach the CAFP to it.
Attaching CAFP to Stand:
To affix the CAFP to a stand, simply attach
the stand to a concrete pad using the pre
drilled holes in the stand’s feet, then affix
the CAFP to the stand via the mounting
holes on the front. (See
Stand
)
Installing Cable Access:
To bring cabling into the CAFP, remove
one of the six knock outs located along
the right and left vertical sides of the back
of the controller housing and install a 1/2"
3R-rated conduit connector for access.