Simplex 4100U-S1, Руководство оператора

Страница: 49 / 86

7-3
The 4100U-S1 system uses four access levels, referred to by the numbers one through four, to
control what system operators can do with the system. The system typically operates at access
level one, which allows an operator to accomplish basic tasks without logging in to the system.
Other functions, for example certain control functions, may be passcode protected to prevent
access by unauthorized personnel.
Follow these steps to log in to the system at access level two, three, or four.
1. Obtain the passcode for the access level at which you want to operate.
2. Press the <MENU> key. The alphanumeric display shows the following message.
3. Press the <ENTER> key on the numeric keypad. The following message displays.
4. Press the 1 key on the Numeric keypad. The display shows the following message.
5. Enter the passcode for the access level. The passcode can be up to 10 numbers in length.
Press the <ENTER> key on the numeric keypad when you have finished entering the code.
An X is displayed for each digit of your passcode, as shown below.
Continued on next page
Logging In and Out of the System
Introduction
Log In Procedure
Press <NEXT> or <PREVIOUS> to scroll
Change Access Level?
1 = Login 2 = Logout
CURRENT ACCESS LEVEL = 1
Enter a Passcode followed by <ENTER>
Enter a Passcode followed by <ENTER>
XXX