Simplex 4100U-S1, Руководство оператора

Страница: 40 / 86

5-4
Press this Key on Keypad Data to Enter
AUX – allows you to select an
Auxiliary Relay
<AUX>, followed by <ENTER>, where AUX
represents an auxiliary relay and is a number from x
to y.
FB – allows you to select a
feedback point. <FB>, followed by <ENTER>, where FB represents
a feedback point and is a number from x to y.
IDNet –allows you to select an
IDNet, Mapnet or VESDA
point.
<IDNET> followed m-dd, followed by <ENTER>,
where m represents the IDNet channel number and
dd is the device address. For example, to select
point M1-13, you would press the IDNet key and
then enter 1 (channel). Next press the <-> key to
enter the dash, and then press the 1 and 3 keys to
enter 13 (device number).
Note 1: Although the <IDNET> key is pressed, the
LCD displays M (for MAPNET).
Note 2: New multipoint IDNet devices use sub-point
addressing. These sub-points are
addressed as c-dd-s, where s is the sub-
point. Example: A FRIAM device has a
relay at sub-point 1 & an input at sub-point
2.
P / A / L – allows you to select
a digital (P), analog (A), or List
(L) pseudo point.
Enter the number corresponding to the digital
pseudo, analog pseudo, or list point. For example,
pressing the <P> key then <2>, <ENTER> selects
the Lamp Test Key pseudo point.
NET – allows you to select a
network point.
Enter a network node number , followed by
<ENTER>. The system then prompts for the type
of point you want to select. Press the keypad key
corresponding to the type of point (Zone, Signal,
etc.) Use the descriptions above for information on
selecting the specific point.
For example, to select zone 3 on node 2, you would
press the <NET> key, <2> then <ENTER>. Next
press <ZN> (key 1), <3> then <ENTER> for zone 3.
ADDR = sw address of the
card in the system.
Specify the address using the format c-p-s, where c
is the card, p is the point, and s is the subpoint.
You must insert the dash between the components
of the address. Use the <-> key to do this.
For example, to select address 0-7-3 (Brigade
Alarm Relay), you would press the <ADDR> key.
<ADDR> <0> <-> <7> <-> <3> <ENTER>
Note:
System points are given a card address of
0. The first real card address is 1.
Selecting Points with the Entry Keypad,
Continued
Selecting Points,
( continued )