Simoniz 299-2870-6 Скачать руководство пользователя страница 4

4

1. I

mportant

 p

recautIons

 (

cont

.)

1.2 Safety Warnings (cont.)

  WARNING—INJECTION HAZARD

 

Equipment can cause serious injury if the spray penetrates 
the skin. Do not point the gun at anyone or any part of the 
body. In case of penetration, seek medical aid immediately.

  CAUTION—DETERGENTS

 

This device has been designed for use with detergents 
that are specifically approved for pressure washer use. The 
use of other cleaning detergents may affect the operation 
of the device and void the warranty.

  CAUTION—SPRAY GUN

 

The spray gun kicks back, so hold it with both hands. The 
trigger gun safety lock prevents the trigger from being 
engaged accidentally. However, the safety feature DOES 
NOT lock the trigger in the 

ON

 position.

  CAUTION—WATER CONNECTIONS

 

For use with fresh and clean water only. Do not use this 
product with other liquids.

 

The water supply system must be protected against 
backflow.

 

Never use this product with water contaminated with 
solvents (e.g. paint thinners, gasoline, oil, etc.).

 

Always prevent debris from being drawn into the product 
by using a clean water source and an additional water 
filter, if required.

 

If this device is connected to a potable water system, the 
system must be protected against backflow.

 

Suitable water temperature: from 41 to 104ºF (5 to 40ºC).

 

  CAUTION—USE

 

Learn how to stop the device and release the pressure 
quickly. Familiarize yourself with the controls.

 

Keep all connections dry and off the ground.

 

Avoid accidental starts. Shut power 

OFF

 before connecting 

or disconnecting the power cord.

 

Never carry the pressure washer by the cord.

 

Do not pull on the cord to disconnect from the outlet.

 

To allow for free air circulation, the pressure washer 
should not be covered during operation.

 

Do not operate the product when tired or under the 
influence of alcohol or drugs.

 

Do not stand on unstable surfaces. Stand with both feet 
balanced at all times.

 

Keep the operating area clear of people and pets.

  IMPORTANT—MAINTENANCE

 

Any assembly, use or maintenance of the product must 
be carried out by adults only.

 

Follow the maintenance instructions specified in the 
manual.

 

If replacement of the power plug or cord is needed, use 
only identical replacement parts.

 

Repairing and replacing parts should be done by a 
certified technician.

 

Before servicing, cleaning or removal of any parts, shut 
the power 

OFF

 and release the pressure.

  IMPORTANT—GROUNDING

 

This product must be grounded. If it has a malfunction or 
breakdown, grounding provides a path of least resistance 
for electric current to reduce the risk of electric shock. This 
product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must 
be plugged into an appropriate outlet that is properly 
installed and grounded in accordance with all local codes 
and ordinances.

Important Precautions

S2000-Washer-EN-01.indd   4

2015-01-13   3:10 PM

Содержание 299-2870-6




















Отзывы: