16
8. c
leanIng
and
m
aIntenance
8.1 Connections
The connections on the pressure washer’s hoses, gun, and spray
wand should be cleaned and lubricated with non-water-soluble
grease regularly.
8.2 Cleaning the Nozzles
Clogging of the nozzle causes the pump pressure to be too
high, making it necessary to clean the nozzle immediately. You
can clean the nozzle by carefully inserting the Cleaning Needle
(G) into the clogged nozzle to clean out any deposits.
8.3 Water Filter Screen
The pressure washer is equipped with a water inlet screen (C)
to protect the pump. If the screen is not kept clean, the flow of
water to the pressure washer will be restricted, and the pump
may become damaged.
To clean the water inlet screen:
•
Remove the filter screen from inside the inlet adapter
(the inlet adapter comes pre-assembled to the machine).
•
Rinse the screen until it is free of debris and obstructions.
•
Place the screen back to prevent foreign particles from
entering the pump.
9. t
echnIcal
s
pecIfIcatIons
Peak pressure:
2000 PSI (13.8 MPa)
Rated max pressure:
1300 PSI (9 MPa)
Power source requirement:
120 V / 60 Hz
Electrical cord:
23’ (7 m) 16 AWG
High-pressure hose:
23’ (7 m)
US GPM at high pressure mode: 1.5 GPM (5.7 LPM) @ 1300 PSI
US GPM at high volume mode: 3.0 GPM (11.4 LPM) @ 100 PSI
Current drawn:
13 A
Inlet water:
Cold tap water
CU (cleaning units):
3000
Motor:
Induction
Pump:
Aluminum, direct-drive
Plastic Wheels:
7” (17.8 cm)
Weight:
50 lb 4 oz (22.8 kg)
Cleaning and Maintenance / Technical Specifications
S2000-Washer-EN-01.indd 16
2015-01-13 3:10 PM
