Page 6
3. MENU SYSTEM
The SRP9180 radio software uses a programmed menu structure to enable the operator to access the radio
options. The structure of the menu can be configured to meet the customer’s specific needs using the FPP.
Figure 2 (overleaf) illustrates the menu structure of the radio. Note that the order and presence of each menu is
determined by the configuration of the radio programmed by the FPP. There are Setup submenus that provide
access to radio setup parameters.
Possible Menu entries are:
Phone Book
•
Recall
•
Stored Calls
•
Call Types
•
Status
•
Setup
•
User Options
•
Group
•
Phone Book Edit
•
Alert Volume
•
Radio Information
•
Received Signal Strength Indication (RSSI)
•
Send Message
•
To assist the user in menu key selection, a soft menu label will often appear above the function keys. The label
shows the user the current function for that key which may change between different menus.
Programming of menus is a configuration task normally performed by the System Manager using the FPP.
3.1 MENU NAVIGATION
The
M
key is generally used to select Menu mode from the main Screen. Once in Menu mode, the keys
cycle through the menus.
To exit Menu mode, press the
M
key again or the Menu timeout will exit automatically. Generally, pressing the
M
key while in a menu backs up to the next highest level of menu and the OK key selects the function.
The keys are generally used to navigate through a list of options Phonebook entries, or to increase or
decrease a value.
SRP9180 - Trunked Portable Radio User Guide