SRM9030plus ~ Trunked Mobile Radio User Guide
© TMC Radio 2008
Page 5
TNM-U-E-0093 Issue 1.1
1. INTRODUCTION
1.1
O
VERVIEW
The SRM9000 Series Radios are versatile Digital Signal Processor (DSP) controlled, two-
way mobile radios. The SRM9000 Series is available in a number of frequency bands and
versions for specific applications. This manual describes the operation of the SRM9030plus
Trunk Alphanumeric Display variant.
The radio consists of a Transceiver unit that may be mounted in the vehicle boot or under a
seat, and an Alphanumeric Control Unit, which is designed to mount on the vehicle console
or within view and reach of the driver. A microphone and speaker connected to the Control
Head provide the audio interface.
The radio is software programmable and it can be customised to the operational
requirements of your particular fleet. Your
TMC Radio
representative can help in
programming your radios facilities to meet your present and future requirements.
This guide describes the facilities that are currently available and can be programmed into
the SRM9030plus.
1.2
I
NSTALLATION
As the installation of your SRM9030plus Radio is a technical and possibly hazardous
operation, we recommend that it is installed and set up for use by your dealer or an
authorised installer. However, if you need information regarding the correct procedures
for installation, please refer to the SRM9000 Series Installation Instructions supplied with
the radio.