SRM9030plus ~ Trunked Mobile Radio User Guide
© TMC Radio 2008
Page 18
TNM-U-E-0093 Issue 1.1
6.2
M
AKING A
S
TATUS
C
ALL
Status Calls allow a Status Number to be sent between users. This “status number” can
have a meaning that the user assigns to it.
e.g.
1
may mean : “On the Job”
2
may mean : “At Lunch”
14
may mean : “Contact Home”, etc.
The SRM9030plus automatically associates the number with the text when a Status is to be
sent.
A Status Message can be sent in a number of ways similar to making Voice Calls.
6.2.1 Using the Phonebook
To send a Status Call using the Phonebook:
•
Scroll through the Phone book until the persons name is displayed (or enter the ID
number using the Keypad).
•
Do NOT press #.
•
Using the Up/Down Arrow buttons, scroll through to the Status Screen.
•
Then use the Left/Right Arrow buttons to scroll through the entries until the desired
message is displayed.
•
Press the Green Handset button to send the Status Message to the selected
Phonebook person (or entered number).
Note: Your radio may be set up to send all Status Messages to a fixed identity.
6.2.2 By Dialling the Numbers
If the Status Message Number and the destination ID Number are known, use the keypad to
enter the numbers in the format
*0n*x# where n is the Status Message Number, and
x
is and the destination ID Number
e.g.
If Status 2 (“At Lunch”) is to be sent to Andrew Jones (Identity 35) :
Enter
*02*35#
Note: You cannot send a Status Message during a Voice Call.