SRM9030plus ~ Trunked Mobile Radio User Guide
© TMC Radio 2008
Page 14
TNM-U-E-0093 Issue 1.1
5. COMMON FUNCTIONS AND FACILITIES
5.1
S
WITCH
-O
N
/S
WITCH
-O
FF
•
Momentarily press the On/Off/Volume Knob to
switch the radio ON.
•
The display will illuminate and show a ‘Welcome
Message’ and the Trunk Identity of the radio.
•
After a brief time the display will revert to the
Phonebook Screen
, at which time the radio is
ready for use.
•
Pressing and holding the On/Off knob for approximately 2s will switch the radio Off.
•
If the radio Inactivity Timer is enabled, the radio
will automatically turn Off after several hours of
inactivity (i.e. no buttons pressed). The radio will
emit warning beeps for 10 seconds prior to
switching off. Pressing any button will reset this
timer.
The radio can also be setup to switch on automatically with the Vehicle Ignition whenever the
vehicle is started.
5.1.1 In-Service Indication
After switch on the radio must 'Register' with the
Trunking Network before it can place or receive
calls. When the radio is searching for the best
channel a rotating arrow and the signal strength of
the scanned channel is displayed. When the radio
has registered, the rotating arrow symbol will
disappear.
The radio is said to be IN SERVICE when it is in contact with the Network, and the arrow
symbol is not displayed. A call cannot be made until the radio is IN SERVICE. The radio
can queue one call (identified by the * icon) which will be made as soon as the radio gains
service.
5.1.2 Volume Adjustment
The Volume Control adjusts the speech level at the loudspeaker. Rotating the knob
clockwise increases the volume and anti-clockwise decreases the volume.
Note: The radio can be programmed so that the volume cannot be turned off completely.