SRM9030plus ~ Trunked Mobile Radio User Guide
© TMC Radio 2008
Page 19
TNM-U-E-0093 Issue 1.1
6.3
R
ECEIVING A
C
ALL
The SRM9030plus will respond to incoming calls according to the type of call being received.
There are three types of call:
•
Voice Call.
•
Group Voice Call.
•
Status Message or Data Message.
6.3.1 Receiving a Voice Call
When a call is received the radio will ring and display the call setup icon and the
originator of the call.
While the radio is ringing, the user can answer the call:
•
by pressing the Microphone PTT button
•
by removing the Microphone from its bracket, or
•
by pressing the Green Handset button.
When the call is answered, both radios will be connected and will display the audio enabled
icon.
A conversation can now take place by each operator, in turn, pressing their Microphone PTT
buttons and speaking.
When the call is finished, either operator can end the call by:
•
replacing the Microphone on its bracket, or
•
pressing the Red Handset button.
•
pressing * then # on the keypad.
If a ringing call is not answered before the Network times out, or the Caller cancels the call,
details of the call are entered in the Stored Calls Screen, refer to Section 4.2.
Notes:
1. The SRM9030plus responds in the same manner as above for Priority and
Emergency calls. Emergency Calls show Emergency on the display.
2. Some Trunking Networks provide a different Call-Set-Up method which allows the
radios to automatically answer incoming Voice Calls or allows the Caller to speak to
the called person while the radio is ringing.