Simex MultiCon CMC-N16 Скачать руководство пользователя

Страница: 248 / 292

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-N16

7.17.

ACCESS OPTIONS

To prevent an accidental or unauthorized change of the settings the user can set

a single or

MultiLevel Access

protection. Both of them can be activated in the

Access

options

menu.

A Single-level access protection requires to enter a password (see

Fig. 7.152

) in order

to login as the Admin and obtain access to all the settings of the device.

MultiLevel Access

protection requires the user to go through the Authentication

procedure (see

Fig. 7.153

) in order to log in and get access to the appropriate permission.

It is done by choosing the user (see

Fig. 7.154

) and passing his password.

A password can be activated in two different ways depending on the level access

protection. In the

Access options

menu by pressing the button next to the

Access

password

label (for single-level mode) or in the

Users list

menu (for

MultiLevel Access

mode) by typing the user's password in the text box (see

). After

closing the text box, in place of the entered password, 8 asterisks will be displayed

independently from the password length.

Removing the password is even easier, it is done by leaving the text box empty. After

that, the field next to the

Access password

label will also be empty.

When the user passes through the login process successfully, on the an opened

padlock with the letter “A” appears on the information bar (if the single level mode is set or the
user is logged as Administrator in the

MultiLevel Access

mode) appears (see

Fig. 7.156a

Otherwise a number of user will be displayed (from 2 to 16) instead of opened padlock (see

Fig. 7.156b

). Only the administrator can freely configure the unit without restrictions.

Furthermore, the administrator configures other users accounts for

MultiLevel Access

Those users can configure the device according to Administrator's restrictions. Entering
an incorrect password or attempt to enter a restricted function will cause denial (see

Fig.

7.157

Only one user can be logged in at a time . The user can be logged out manually by

touching the padlock icon on the information bar and confirming a logout (see

Fig. 7.158

) or

automatically after one minute for the single level mode or after the time set by the

Administrator (in both cases the time is measured from the last user's interaction with the
device).

For the

MultiLevel Access

mode there is a possibility to log in by connecting your

248

Device configuration

MENU

General settings

Logical channels

Built-in inputs

Built-in outputs

External outputs

Profiles/timers

Controllers

Groups

Modbus

Network settings

Access options

E-mail notifications

Access options

Содержание MultiCon CMC-N16





































































































































































































































































































Результаты поиска

Содержание MultiCon CMC-N16

Отзывы:

Похожие инструкции для MultiCon CMC-N16

Бренды по названию

Популярные бренды

Simex MultiCon CMC-N16, Руководство пользователя

Результаты поиска

Содержание MultiCon CMC-N16

Отзывы:

Похожие инструкции для MultiCon CMC-N16

Бренды по названию

Популярные бренды