Sime SOLIDA 8 PL, Руководство пользователя

Страница: 90 / 92

90
2.3.10 CLEANING (FIG. 19)
Cleaning operations must be carried out at
regular intervals and only when the boiler
is cold.
Combustion residuals collect in the remo-
vable drawer that must be emptied before
starting the boiler. To remove all combu-
stion residuals, use an ordinary aspirator
and verify that all the ashes inside the com-
bustion chamber have been completely
removed. The aspirator can also be used to
clean the pellet grille.
To clean the fume ducts inside the boiler
body, use a wiper.
ATTENTION: if the generator is switched off
for long periods of time (above 15 days), it is
necessary to empty the 200 - 500 dm
3
pellet
container in order to prevent the pellets
from absorbing excessive humidity, which
could affect the operation of the boiler.
A high amount of humidity in the pellets
could cause them to pulverize, increase
the amount of residuals in the brazier and
obstruct the pellet feeding system.
2.3.11 ANNUAL MAINTENANCE
For optimum performance, it is advisable
to have the boiler inspected accurately and
thoroughly by qualified personnel at least
once every season.
Before performing maintenance opera-
tions, verify that the boiler is cold and has
been disconnected from the mains.
2.3.12 THE THERMAL DISJUNCTOR
The auger motor is protected by a single
pole thermal disjunctor (ETA 106-P10-1,
5A) overcurrent small. Safety intervention
by means of a quick-release mechanism
and interruption of the contact for motor
protection.
In the event that the thermal disjunctor to
intervene, to restart the burner reset button
shown in Fig. 20.
ATTENTION: The parts numbers of the Unit
from 100259 to 100298 included, have the
thermal disjunctor inside the control panel.
Fig. 19
Removable
drawer
Pellet grille
Fig. 20