Sime SOLIDA 8 PL, Руководство пользователя

Страница: 80 / 92

80
N) Push the feeder volute with the motor into its slot inside the pellet container (with a 200 -500 dm
3
capacity) until its stops, and verify that the
bucket is pointing upwards. Fix the volute onto the container using the screws that are already available on the container.
O) Connect the 10 pole connector (JB) on the control panel to the burner, safety sensor and to the volute motor power plug.
P) Assemble the burner motor verifying that it is correctly connected to the safety sensor.
M) Connect the flexible self-extinguishing pipe with the straps to the burner and pellet feeding volute. Verify that the tube is fully stretched to
prevent it from blocking the pellets.
Fig. 13.21: Insertion of the volute into the pellet container Fig. 13.22: Volute fixing
Fig. 13.23: Assembly of connector JB
Fig. 13.25: Volute motor plug Fig. 13.24: Connection of sensor
Fig. 13.26: Assembly of burner cover
Fig. 13.27: Checking the sensor connection
Fig. 13.28: Fixing the lower section of the flexible tube Fig. 13.29: Fixing the upper section of the flexible tube