background image

6

RESTRICTIONS

DO NOT

– To allow children under the age of 8 to 

use the appliance. The appliance can 

be used by children no younger than 

8 years old, by people with physical or 

cognitive disabilities, and by people 

lacking experience or the necessary 

knowledge, provided that they are su-

pervised or have been instructed on 

how to use the appliance safely and 

that they understand the risks associ-

ated with it.

– To allow children to play with the ap-

pliance.

– To allow unsupervised children to per-

form user maintenance and cleaning.

– Do not use electrical devices or ap-

pliances such as switches, electrical 

appliances etc if you can smell gas.  If 

this should happen:

open the doors and windows to venti-

late the room;

turn the gas off at the meter;

call the emergency service 0800 

111999.

– Do not touch the appliance with bare 

feet or with any wet part of the body.

– Do not carry out any repair, mainte-

nance or cleaning operation before 

having disconnected the appliance 

from the mains power by setting the 

main switch to "OFF", and closing the 

gas supply.

– Do not modify the safety or adjustment 

devices without authorization and in-

structions from the manufacturer.

– Do not block the condensate drain.

DO NOT

– Do not pull, detach or twist the electri-

cal cables coming out of the appliance 

even if the appliance is disconnected 

from the mains power supply.

– Do not expose the boiler to atmos-

pheric agents. The boiler is suitable 

for use in partially protected places 

according to standard EN 15502, with 

a maximum ambient temperature of 

60°C and a minimum of -5°C. We rec-

ommend installing the boiler under a 

sloping roof, on a balcony or in a shel-

tered corner. In all cases it must not be 

directly exposed to bad weather (rain, 

hail, snow). The boiler is equipped with 

a series of anti-freeze functions.

– Do not leave  containers with flamma-

ble substances in the room where the 

appliance is installed.

– Do not place or store items on or close 

to the appliance.

– Do not load the refrigerating circuits 

with a refrigerant other than the one 

indicated on the ID plate. Using a dif-

ferent refrigerant may cause serious 

damage to the compressor.

– Do not use oils other than those indi-

cated in this manual. Using a different 

oil may cause serious damage to the 

compressor.

– Do not dispose of the R-410A refrig-

erant irresponsibly; it is a fluorinat-

ed greenhouse gas with 1975 global 

warming potential (GWP).

Содержание MURELLE REVOLUTION 30





































































































Отзывы: