Sime Murelle 20 BFT, Руководство пользователя

Страница: 93 / 108

93
ES
PT
GB
3.3 ACCESS TO INSTALLER'S
PARAMETERS
For access to the installer's parameters,
press simultaneously the keys and
for 5 seconds (3 fig. 14).
For example, the parameter PAR 23 is
visualised on the display of the control
panel in the following way:
T h e p a r a m e t e r s s c r o l l f o r w a r d s a n d
backwards with the key and and
the default parameters can be changed
with the keys and .
The standard visualisation returns automa-
tically after 60 seconds, or by pressing one
of the control keys (2 fig. 14).
3.3.1 Replacing the board or
RESETTING parameters
If the electronic board is replaced or reset,
it is necessary to configure PAR 1 and PAR
2 by associating the following values to
each type of boiler to be able to restart the
boiler:
NOTE: the inside of the upper door of the
boiler panel has a label with the values
that have to be set for PAR 1 and PAR 2
(fig. 21).
PARAMETERS INSTALLER
FAST CONFIGURATION
PAR DESCRIPTION RANGE UNIT OF INC/DEC DEFAULT
MEASUREMENT UNIT SETTING
1 Combustion configuration -- = ND = = “--”
1 ... 12
2 Hydraulic configuration -- = ND = = “--”
1 ... 5
1 = DHW + Recirc. pump
3 Timetable 2 programmer 2 = DHW = = 1
3 = Recirculation pump
4 Pressure transducer disabler 0 = Disabled = = 1
1 = Enabled
5 Assignment of auxiliary relay AUX 1 = Remote supply = = 1
(D.H.W. tank) 2 = Recirculation pump
6 Luminous bar indicating presence 0 = Disabled = = 1
of voltage 1 = Enabled
0 = Not assigned
7 Allocation of CR 73 channels 1 = Circuit 1 = = 1
2 = Circuits 1 and 2
8 -- -- -- -- --
9 -- -- -- -- --
1 = CR 73
10 Remote control option setting 2 = CR 53 = = 1
3 = RVS
11 Correction values external sensor -5 ... +5 °C 1 0
D.H.W. - HEATING
PAR DESCRIPTION RANGE UNIT OF INC/DEC DEFAULT
MEASUREMENT UNIT SETTING
20 D.H.W. minimum temperature 10 °C ... PAR 21 °C 1 30
21 D.H.W. maximum temperature PAR 20 ... PAR 62 OEM °C 1 60
22 Anti-legionella (D.H.W. tank) 0 = Disabled = = 0
1 = Enabled
23 Boiler antifreeze - 5 ... +5 °C 1 3
24 External sensor antifreeze - 15 ... +5 °C 1 - 2
25 Climatic curve setting Zone 1 3 ... 40 = 1 20
26 Climatic curve setting Zone 2 3 ... 40 = 1 20
27 Minimum temperature Zone 1 PAR 64 OEM ... PAR 28 °C 1 20
28 Minimum temperature Zone 2 PAR 27 ... PAR 65 OEM °C 1 80
29 Minimum temperature Zone 2 PAR 64 OEM ... PAR 30 °C 1 20
30 Maximum temperature Zone 2 PAR 29 ... PAR 65 OEM °C 1 80
31 Maximum heating power 30 ... 100 % 1 100
32 Post-circulation temperature 0 ... 199 Sec. 10 30
33 Pump activation delay Zone 1 0 ... 199 10 sec. 1 1
34 Re-ignition delay 0 ... 10 Min. 1 3
EXPANSION CHART
PAR DESCRIPTION RANGE UNIT OF INC/DEC DEFAULT
MEASUREMENT UNIT SETTING
40 Assignment to mixed zones 1 = Zone 1 = = 1
2 = Zone 2
41 Mix valve stroke time 0 ... 199 10 sec. 1 12
42 Priority D.H.W. over mixed zone 0 = Paralle = = 1
1 = Absolute
43 Floor drying 0 = No activated = = 0
1 = Curve A
2 = Curve B
3 = Curve A+B
RE-SET
PAR DESCRIPTION RANGE UNIT OF INC/DEC DEFAULT
MEASUREMENT UNIT SETTING
49 Reset default parameters -- , 1 = = =
(par. 01-par 02 = “-“)
BOILER GAS MODELS PAR 1
METHANE 20 1
25 2
30 3
BF/BFT 35 4
LPG 20 5
25 6
30 7
35 8
METHANE 25 9
OF/OFT 30 10
LPG 25 11
30 12
BOILER PAR 2
OF/BF 1
OF/BF COMBINED 2
WITH SUN-PANEL SYSTEM
OFT - BFT - 25/55 - 30/55 3
SYSTEM 4
AQUAQUICK 5