Sime 8115101 страница 3 Скачать руководство пользователя

Страница: 3 / 80

SAFETY WARNINGS AND REGULATIONS

WARNINGS

– After having removed the packaging

make sure that the product supplied is

integral and complete in all its parts. If

this is not the case, please contact the

Dealer who sold the appliance.

– The appliance must be used as intend-

ed by

Sime

who is not responsible for

any damage caused to persons, ani-

mals or things, improper installation,

adjustment, maintenance and improper

use of the appliance.

– In the event of water leaks, disconnect

the appliance from the mains pow-

er supply, close the water mains and

promptly inform professionally quali-

fied personnel.

– Periodically check that the operating

pressure of the water heating system

when cold is

1-1.2 bar

. If this is not the

case, increase the pressure or contact

professionally qualified personnel.

– If the appliance is not used for a long

period of time, at least one of the fol-

lowing operations must be carried out:

set the main system switch to "OFF";

close the gas and water valves for the

water heating system.

– In order to ensure optimal appliance

operations

Sime

recommends that

maintenance and checks are carried

out

ONCE A YEAR

– If the power cable is damaged, replace

it with a cable ordered as a spare part

with the same characteristics (type X).

Assembly must be by carried out by a

qualified professional.

WARNINGS

–

It is recommended that all operators

read

this manual carefully in order to use the

appliance in a safe and rational manner.

–

This manual

is an integral part of the

appliance. It must therefore be kept for

future reference and must always ac-

company the appliance in the event the

appliance is transferred or sold to an-

other Owner or User or is installed on

another system.

–

Installation and maintenance

of this ap-

pliance must be carried out by a qual-

ified company or by a professional-

ly qualified technician in accordance

with the instructions contained in the

manual. Once the work is complete,

the company or technician will issue a

declaration of conformity with national

and local technical standards and legis-

lation in force in the country where the

appliance will be used.

–

Any repairs on the appliance

must be

carried out solely by professional-

ly qualified personnel, using original

spare parts only. Failure to comply with

these instructions can jeopardise the

appliance’s safety and void the warranty

with immediate effect.

–

Fonderie SIME S.p.A.

reserves the right

to make improvements to its products

at any time without prior notice, without

compromising their essential charac-

teristics. The graphic illustrations and/

or images in this document may show

optional accessories that vary accord-

ing to the country in which the appli-

ance is used.

Содержание 8115101

















































































Результаты поиска

Содержание 8115101

Отзывы:

Похожие инструкции для 8115101

Бренды по названию

Популярные бренды

Sime 8115101, Инструкция для пользователя, по установке и обслуживанию

Результаты поиска

Содержание 8115101

Отзывы:

Похожие инструкции для 8115101

Бренды по названию

Популярные бренды