Sime 8115101 Скачать руководство пользователя страница 28

Страница: 28 / 80

6.7

Water system treatment

When filling and restoring the system it is good practice to use

water with:

– aspect: clear if possible

– Ph: 6÷8

– hardness: < 25°f.

If the water characteristics are different from those indicated, it

is recommended that a safety filter is used on the water deliv-

ery pipe to retain impurities, and a chemical treatment system

to protect against possible deposits and corrosion which could

affect boiler operation.

If the systems are only low temperature systems, it is recom-

mended that a product is used to prevent the development of

bacteria.

In any case, please refer to and comply with the legislation and

specific technical standards in force in the country where the ap-

pliance will be used.

6.8

Boiler installation

MURELLE.HT

boilers leave the factory with a paper template for

installation onto a solid wall.

For installation:

– position the paper template (1) on the wall (2) where the boiler

is to be mounted

– make the holes and insert the expansion plugs (3)

– hook the boiler onto the plugs.

Fig. 35

CAUTION

The height of the boiler is to be such that disassembly

and maintenance interventions are facilitated.

6.9

Plumbing connections

The plumbing connections have the following characteristics and

dimensions.

65 65 65 65

450

U G E R

182,5

115

Fig. 36

Description

MURELLE.HT

M - System delivery

Ø 3/4" G

R - System return

Ø 3/4" G

U - Domestic hot water output

Ø 1/2" G

E - Domestic hot water inlet

Ø 1/2" G

G - Gas supply

Ø 3/4" G

Sc - Condensate outlet

Ø 20 mm

6.9.1

Plumbing accessories (optional)

To facilitate plumbing and gas connections to the systems, the

accessories as shown in the table below are available and are to

be ordered separately from the boiler.

DESCRIPTION

CODE

Assembly template

8081221

Lower template element (50 pieces)

8075437

Curve kit

8075418

Curve and valve kit with connections from DIN to

SIME

8075443

Cocks kit

8091806

Valve kit with connections from DIN to SIME

8075442

Wall mount replacement kit for other makers

8093900

Polyphosphate dosing kit

8101700

Dosing recharge kit

8101710

Solar kit for instant combination boilers

8105101

Condensate pump kit

8105302

Compact dirt separator

8101750

Anti-freeze heaters kit (–15°C)

8089816

Concen one wireless room probe kit

8094121

Contact sensor downstream of the compensator

6277122

Band mix valve

8082269

Wireless room sensor

8094110

NOTE:

kit instructions are supplied with the accessory itself or

are to be found on the packaging.

Содержание 8115101

















































































Результаты поиска

Содержание 8115101

Отзывы:

Sime 8115101, Инструкция для пользователя, по установке и обслуживанию, Страница: 28 / 80

Результаты поиска

Содержание 8115101

Отзывы: