Sime 8115101, Инструкция для пользователя, по установке и обслуживанию

Страница: 64 / 80

64
7.4 Parameter setting and display
To access the parameters menu from the “Main screen” :
Menu Mode Zones
Mon 01.01.2018 10:30
Fig. 121
– turn the encoder to select the
“Menu”
(Menu) function
and press the
click
encoder to enter the
“Menu”
(Menu) se-
lection screen
– turn the encoder to select the “TECHNICAL” (TECHNI-
CAL) menu
Menu
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
Menu Mode Zones
Mon 01.01.2018 10:30
Fig. 122
– press the click encoder to access the modifiable area. The
following screen is displayed:
TECHNICAL
Confirm operation
Confirm
Fig. 123
– turn the encoder to select “Confirm” (Confirm) and
press the click encoder to open the submenus
– turn the encoder to select
“Technician param.”
(Tech-
nician param.) item and press the click encoder to enter the
boiler “Parameter settings” area
TECHNICAL
Information [...]
Plant solution [...]
Technician param. [...]
Chimney sweeper [...]
IoT [...]
TSP parameters
Parameter Index 1
1 -------- 49
Parameter Value 1
Fig. 124
– where the
“Parameter index”
(Parameter Index:)refers to the
table found in section “ List of parameters ”
– Turn the encoder to scroll through the list of parame-
ters and check the value
If the value of the selected parameter is to be modified:
– press the click encoder to access the value modification area
TSP parameters
Parameter Index 1
1 -------- 49
Parameter Value 1
Fig. 125
– press the encoder to set the new value
– press the click encoder to confirm the modification and move
on to another parameter
TSP parameters
Parameter Index 1
1 -------- 49
Parameter Value 1
Fig. 126
– after displaying/making changes, press the
“ESC”
button to
complete the modification and return to the
“main screen”
.
Menu Mode Zones
Mon 01.01.2018 10:30
Fig. 127