Simatek GFC 32, Руководство пользователя

Страница: 3 / 15

Control Unit
GFC 32
SIMATEK A/S
www.simatek.com
Hotline: +45 4046 7525
aftersales@simatek.dk
3
Doc. No.: 1400004_DK
Rev.: -
Date: 05.2017
1. Main features
The Simatek GFC 32 has been designed to guarantee the control of diaphragm valves mounted on pulse jet dust
collector filters containing filter bags or cartridges. The main features of the Simatek GFC 32 are:
⋅ Manual selection of Pulse and Pause time.
⋅ Can be operated by a remote pressure switch or PLC.
⋅
Automatic load search for connected valves, while ignoring outlets which have not been connected.
⋅ Shut down cleaning with selectable number of cycles.
2. Technical features
Enclosure Grey ABS – transparent cover
Grade of protection IP65
Dimensions Simatek GFC 32: 20/32 outputs: case 296 x 256 x 118.
Weight Simatek GFC 32: 20/32 outputs: approx. 3.5 kg.
Connections Push in terminal plugs – max. section 2.5 mm².
Temperature Storage: -20° C/+80° C.
Operating: -10° C/+50° C, with duty cycle 30 %
Voltage available Input: 230 V (±10%) – 50/60 Hz / Output: 115/230/24V AC, 24 V DC.
Input: 115 V (±10%) – 50/60 Hz / Output: 115/24V AC, 24 V DC.
See page 6, 6.1
Special version 24V DC/24V DC
Power consumption Without output 2.5 VA.
Output: max 25 VA / AC or 20 W / DC.
Pulse time 0.01 – 9.99 sec
Pause time 1 ÷ 999 sec
Max duty cycle 30 %
Remote control Activated via external contact (normally open) free of power.
Shut down cleaning To be operated from the normally closed contact of fan remote control switch
Alarm relay Short circuit or Watch Dog (electronic surveillance of the microprocessor)
Relay max 2 A – 250 V AC, free contact
Main fuse 1 A delayed 115-230 V; 2 A delayed 24-48 V AC and 24 V DC power supply
The device should be disposed of in accordance with current European
regulations
The neutral of the power supply shall be connected to earth.
If this is not the case an isolation transformer is to be
installed and the neutral of the output to be earthed.
Otherwise the filter control will be damaged.