Control Unit
GFC 32
SIMATEK A/S
www.simatek.com
Hotline: +45 4046 7525
[email protected]
11
Doc. No.: 1400004_DK
Rev.: -
Date: 05.2017
14.
Factory settings/Program menu
14.1
Pulse time
Simatek recommends a pulse time of 0.2 sec.
14.2
Pause time
By continuous cleaning, the pause time is calculated from a
total cleaning time for the filter of 180 sec.
See recommended pause time by continuous cleaning for the
current filter type.
14.3
Pause time – Shut down cleaning
The pause time during shut down cleaning may be set as
required according to the properties of the dust in question,
however, the pause time must be correspond to the compressor
capacity.
14.4
Shut down cycles
Bag cleaning will continue during the set number of cycles (first
valve to last valve) after connection between Fan [36] and
Common [37], (fan stopped).
Any equipment for removal of the separated dust should run during shut down cleaning.
Simatek recommends 2-3 cycles, as the current cycle is regarded as the first shut down cycle. Therefore the first cycle
will not necessarily be a full cycle.
Recommended pause times for SimPact
®
4T/4T-R filters