Sima XL-6 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 14

Sima XL-6 Скачать руководство пользователя страница 7

7. As the frame fi lls with air, be sure it is clear of any nearby objects. Guide the frame up as it fi lls with air,
helping to unfold and expand it. It should take approximately 5 minutes for the screen to infl ate.

( See Photos Below)

8. You are now ready to attach the screen using the Velcro patches. Please see
instructions for attaching the screen to the frame further on in the instruction manual.

Note: When Using the Screen Outdoors

• The dark colored material from which the Infl atable Theater Frame is construction tends to absorb the
heat from the sun, which causes the air inside the frame to warm up and expand if the screen is used
on a sunny day. If the frame is left out overnight, the air inside the frame will cool and contract, which
may cause the frame to sag slightly. The sagging is not due to the frame losing air, and can be
corrected by “topping off ” the frame with air prior to use.

• It is recommended to keep the supplied air pump on hand to add
additional air when using the XL-6 Theater during an all day event.

• Be sure to defl ate frame and store after usage.

1

2

3

4

Page 7

«
...
5
6
7
8
9
...
»

Содержание XL-6















Отзывы:

Нет отзывов