Sima XL-6 Скачать руководство пользователя страница 14

90 Day Limited Warranty

Sima Products Corporation

Sima Products Corp. (“Sima”) warrants that if the accompanying product proves to be defective to the 
original purchaser in material or workmanship within 90 days from the original retail purchase, Sima will, 
at Sima’s option, either repair or replace same without charge (but no cash refund will be made). 

What you must do to enforce Warranty:

You must deliver, mail or ship the product, together with both the original bill of sale and this limited
Warranty statement as proof of warranty coverage to:

Sima Products Corp.
Attn: Customer Service
140 Pennsylvania Ave.
Bldg. #5 
Oakmont, PA 15139

Phone: 412. 828.3700

It is recommended that you call Sima at the number listed above to obtain a return authorization number.

Limitation of Liability and Remedies

Sima shall have no liability for any damages due to lost profi ts, loss of use or anticipated benefi ts, or 
other incidental, consequential, special or punitive damages arising from the use of, or the inability to 
use, this product, whether arising out of contract, negligence, tort or under any warranty, even if Sima 
has been advised of the possibility of such damages. Sima’s liability for damages in no event shall exceed 
the amount paid for this product. Sima neither assumes nor authorizes anyone to assume for it any other 
liabilities. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 
limitation or exclusion may not apply to you. This warranty gives you specifi c legal rights, and you may 
also have other rights which vary from state to state. 

© 2008, 2009 Sima
Sima Products Corp.
140 Pennsylvania Ave. 
Bldg #5 
Oakmont, PA 15139

www.simaproducts.com

  

PN 21781
Made In China

Page 14

Содержание XL-6















Отзывы: