Sima XL-6 Скачать руководство пользователя страница 3

Introduction

Congratulations on purchasing the XL-6 Theater by Sima Products. Please read this instruction manual 
carefully before installing your infl atable screen. When used properly according to this manual it will pro-
vide hours of entertainment for you and your family.

General Information and Warnings

• Do not over infl ate. Use only the supplied air pump as directed. Never use an air compressor.
• This screen is not a fl otation device, do not use in any type of pool.
• To avoid danger of suff ocation, keep children away from the screen when infl ating and defl ating. Do not  
  let children sit or play on the screen. Always defl ate and store screen immediately after use. Adult super  
  vision is required.
• Do not use screen during high winds in excess of 15 mph or threat of lightning.
• Do not smoke near the screen. Keep away from fi re.
• Do not use sharp objects in any manner around the XL-6 Theater.
• Do not climb or sit on infl ated surfaces.
• Clean only with mild soap and water. Do not use harsh chemicals.

Sima Products has researched all regulations regarding the use of this XL-6 Theater. We have not found any 
regulations related to the use of our screen; however we will not be responsible if some other regulations 
apply to this product in the country you intend to operate the system. It is the users responsibility to be 
aware of such regulations and obey them. Sima Products will not accept any responsibility for failure to 
meet local regulations.

Model                                                    XL-6
Size Infl ated                                       70” x 32” x  78”  (with pontoons)
                                                                  70” x 32” x  62”  (without pontoons)
Weight (in unit box)                       20 lbs

Page 3

Содержание XL-6















Отзывы: