Silverline SCV 1160-50 HV HERMOD, Руководство по сборке

Страница: 28 / 29

14 Service, fault symptoms and solutions
Are there any challenges with the product?
Before calling a service technician
Make sure that the appliance is connected to power and that the
fuse has not blown. Do not do anything that could damage device.
Read below FAQ (frequently asked questions) at www.silverline.dk
to find answers and solutions. Before calling a service technician,
check the hood based on the following points:
Fault description Cause Remedy
No life in the product? Power, Loose connec-
tion, Defective spare
part.
Check if the product is connected to the correct power
(220 - 240 V), Check if any wires are loose. Spare part
must possibly be replaced.
No life in the light
source?
Power, Loose connec-
tion, Defective light
source.
Check if the product is connected to the correct power
(220 - 240 V), Check if any wires are loose. Check if the
light source is defective (replace if necessary).
The product makes
noise, The product
does not suck enough,
The product sucks con-
stantly?
See: Air noise and
Suction * on the fol-
lowing pages.
See: Air noise and Suction * on the following pages.
My grease filters are
discolored?
Filter cleaner in dish-
washer.
When cleaning grease filters in the dishwasher, it is per-
fectly normal for the filters to discolour. This has no
effect on their function. (See possibly chapter 7 Cleaning
and maintenance)
If the problem persists, contact your dealer or JG Nordic Silverline
www.jgnordic.com / www.silverline.dk You can get spare parts
from your local dealer or an authorized service technician. The
required serial no. is inside the hood or on the packaging. Always
remember to give this number, along with the model type, when
ordering service or parts. Creation of service case can also be
done via. www.jgnordic.com / www.silverline.dk under the field
"Service form".
NB:
n - When ordering service on the product, the product must be
available to the installer. Products that are enclosed / insulated
must be made freely available before the fitter arrives.
n When ordering service for the product, the product must be
cleaned before the fitter arrives.
n When ordering service for the product, electricity must be avail-
able in the home to be able to connect the product.
Air Noise and Suction *
Service, fault symptoms and solu-
tions
Service, fault symptoms and solutions
24.07.2020 28