Silverline SCV 1160-50 HV HERMOD, Руководство по сборке

Страница: 10 / 29

DANGER!
Risk of burns & danger of electric shock!
– Wait until the unit has cooled down before
cleaning or maintenance. Disconnect the fuse
or disconnect the device from the mains.
– There is a risk of damage due to seepage of
moisture into electronic parts. Never clean the
control panel with a damp cloth but with a
damp cloth.
– Surface may be damaged due to improper
cleaning. Clean stainless steel surfaces only in
the direction of brushing. Do not use stainless
steel cleaners for the control panel.
– Surface can be damaged by sharp or scrub-
bing cleaners. Never use sharp or scrubbing
cleaners.
Disconnect the fuse or disconnect the device from the wall socket
in the event of a fault or damage to the product. Repairs should
always be performed by an authorized or approved specialist.
In the event of a fault or damage to the device, dis-
connect the fuse or disconnect the device from the
wall outlet and call for authorized service.
If the supply cable is damaged, it must be replaced
by the manufacturer or its service department or
other personnel with equivalent qualifications to
avoid dangerous situations.
When light bulbs in the unit are damaged, remove
the fuse or disconnect the unit from the mains. To
avoid overloading the other bulbs, replace the
defective one immediately (wait until the bulb has
cooled down).
CAUTION!
When the product is used over stoves, accessible
parts may become hot.
DANGER!
Exhaust fumes from the hood must never be con-
nected to the chimney from the stove or other
exhaust ducts used to expel potentially toxic or hot
gases / gases.
DANGER TO LIFE & RISK OF POISONING
24.07.2020 10