Silverline SCV 1160-50 HV HERMOD, Руководство по сборке

Страница: 23 / 29

11 How to operate the product
1- LED indicator
2- Lighting
3- Timer
4- Engine level
5- Forced position adjustment
6- On /off
On /off
By pressing key 6 (On / Off) the damper will open or close.
If the damper is opened, it will close automatically after 60 minutes
Damper adjustment
To adjust the forced position of the damper, press the "S" key for 3
sec. Then "O" and "P" will appear on the screen in order, which
stands for "OPEN".
The product is now ready for adjustment in the open position, ie
forced position.
By pressing key no. 4, the damper will close more and when you
press key no. This is an active part of the program that is 'S'
between 3 different basic positions, which is the same as the cur-
rent one.
You shall exit from the setting mode and the settings made shall be
saved to permanent memory if you do not press the buttons “S”
and “On/Off” for about 15 seconds in the open position setting
mode.
Open Position Levels
1st Level “O”, “P” and “1” shall be displayed respectively
2nd Level “O”, “P” and “2” shall be displayed respectively
3rd Level “O”, “P” and “3” shall be displayed respectively
4th Level “O”, “P” and “4” shall be displayed respectively
5th Level “O”, “P” and “5” shall be displayed respectively
Open position of the air flow mechanism may be
set in 5 different levels. It is set as the 5th level as
default.
Lamp Button
This is the On/Off button for lighting. The lightings are illuminated
when this button is pressed, and they are turned off when it is
pressed again.
1 2 3 4 5 6
Fig. 18
How to operate the product
24.07.2020 23