13
ii. Short Circuit Test for Switch Motor 1st Speed
Cord
Switch the multimeter to the short circuit test mode. Contact one
of the probes (the pole is irrelevant) to the terminal of the brown
cord of the push button and the other one to the terminal of the
red cord. A continuous audible signal shall be issued from the
multimeter and a fixed value shall be displayed on the screen in
this condition. Otherwise, the cord is damaged.
iii. Short Circuit Test for Switch Motor 2nd Speed
Cord
Switch the multimeter to the short circuit test mode. Contact one
of the probes (the pole is irrelevant) to the terminal of the brown
cord of the push button and the other one to the terminal of the
red cord. A continuous audible signal shall be issued from the
multimeter and a fixed value shall be displayed on the screen in
this condition. Otherwise, the cord is damaged.
iv. Short Circuit Test for Switch Motor 3rd Speed
Cord
Switch the multimeter to the short circuit test mode. Contact one
of the probes (the pole is irrelevant) to the terminal of the brown
cord of the push button and the other one to the terminal of the
black cord. A continuous audible signal shall be issued from the
multimeter and a fixed value shall be displayed on the screen
in this condition. Otherwise, the cord is damaged
Содержание H10560 015
Страница 1: ...1 EN SERVICE MANUAL H10560 015 H10590 015...
Страница 6: ...6 4 Explanation of the Characters in the Serial Number...
Страница 10: ...10 7 Grounding Cord 8 Lamp Holder...
Страница 25: ...25 12 Wiring Diagram For All Boards...