Silvercrest SFA 4.1 E1, Руководство по эксплуатации

Страница: 95 / 132

SilverCrest SFA 4.1 E1
English - 93
Once you have connected a device to the hands-free kit, switch the hands-free kit off and then on again. The pairing
process is now complete.
The hands-free kit then has several ‘known’ devices. This status is a prerequisite for an active connection between the
hands-free kit and other devices. A maximum of 8 devices can be stored as ‘known devices’. As soon as a ninth device
is added, the oldest device is removed.
The number of devices that can establish an active connection with the hands-free kit is limited to two. The second
device must be connected within 10 minutes of the first device. A connection can then be re-established automatically
with the second device when the hands-free kit is switched off and on again. If one or two of the known devices enter
the vicinity of the hands-free kit within approx. 10 minutes, a connection to these devices will be established
automatically. You may need to confirm the connection on your mobile phone. If a third known device enters the
vicinity of the hands-free kit, the connection with this device will be blocked as long as there are two active connections
or until one of the two devices goes out of range. If one of the two actively connected devices disconnects, pairing is
possible for the third (waiting) device once the hands-free kit is restarted.
The pairing process can take up to 30 seconds depending on the mobile phone you are using.
If two devices are connected to the hands-free kit, different ring tones will be used for incoming calls. A call
to a second paired phone will be signalled by the hands-free kit if you are on another call.