Silvercrest SBKG 40 A1, Руководство по эксплуатации

Страница: 16 / 234

GB │ IE │ 13 ■
SBKG 40 A1
♦ To terminate the
Bluetooth
® connection, either disable the
Bluetooth ®
function on the
Bluetooth ®
playback device or hold
down the
Bluetooth ®
pairing button
8
for about 2 seconds until
the LED
6
flashes blue and white. The headphones are now in pairing
mode again.
♦ Alternatively, switch the headphones off as described above to deacti-
vate the
Bluetooth
® function.
NOTE
► The next time you turn on the headphones, they will automatically
connect to the last
Bluetooth
® playback device that was connect-
ed. If your
Bluetooth ®
playback device does not automatically
reconnect to the headphones, you will have to re-establish the connec-
tion manually. A detailed description of how to do this can be found
in the operating manual for your
Bluetooth
® playback device.
► If no
Bluetooth ®
connection can be made within 10 minutes, pairing
mode ends and the headphones switch off automatically.
► If there is an existing
Bluetooth
® connection but no music playback
within 10 minutes, the headphones switch off automatically.
► Ensure that the headphones are no more than 10 metres away from
the
Bluetooth
® playback device. Make sure that there are no barri-
ers or electronic devices placed between them.
► As soon as you connect the
AUX IN
socket
0
to the audio cable
w
,
the
Bluetooth ®
function is deactivated and the headphones change
to AUX IN mode
. The
Bluetooth
® function can only be reactivated
once you remove the audio cable
w
from the
AUX IN
socket
0
.