Silvercrest SBKG 40 A1, Руководство по эксплуатации

Страница: 23 / 234

■ 20 │ GB │ IE
SBKG 40 A1
The following table helps to identify and rectify further possible faults:
Fault Possible cause Remedy
The head-
phones cannot
be switched on.
The internal battery
is not charged. Charge the battery (see section
Charging the battery ).
No sound.
The headphones
are not switched
on.
Press the
button
4
for about
2 seconds to switch on the
headphones.
The volume is set to
minimum.
Set the desired volume using
the
button
3
. If necessary,
also increase the volume on the
playback device.
The playback device
is not switched on.
Switch on the playback device.
The playback device
has been muted.
Unmute the playback device.
The audio ca-
ble
w
is incorrect-
ly connected in
AUX-IN mode.
Make sure that the audio
cable
w
is correctly connected
to the
AUX IN
socket
0
of the
headphones and the playback
device.
Sound is only
coming from
one side of the
headphones. The stereo balance
control on the
playback device is
incorrectly adjusted.
Adjust the stereo balance control
to the setting you desire.
NOTE
► If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section
Service ).