Silvercrest 324120 1901, Инструкция по эксплуатации и технике безопасности

Страница: 12 / 54

GB/IE/NI/CY 11
aged or leaking batteries,
exercise a particular caution.
Risk of chemical burns! Wear
protective gloves.
Q
Chemicals escaping from a bat-
tery can cause skin irritation.
Q
In case of contact with skin,
rinse with much water. In case
of contact with eyes, do not rub
your eye, but rinse it with water
and immediately visit a doctor .
Q
Never let the batteries get into
the hands of children. If a small
child puts a battery into his
mouth, he can swallow it. If the
battery is swallowed, call a doc-
tor immediately.
Q
Never use different battery
types together.
Q
When inserting the battery, pay
especial attention to the correct
polarity. Wrong polarity can
cause risk of bursting.
Q
If you do not use the device for
a long time, remove the batter-
ies from the device.

Before you start the device
REMOTE CONTROL:
HOW TO INSERT OR CHANGE THE BATTERY
The remote control unit is delivered together with a lit-
hium button cell. To enable the remote control, remove
the plastic tape that protrudes from the battery compart-
ment
13
(see Figure 1).
If the remote control battery needs to be replaced, in-
sert a new 3-volt lithium button cell. Pay attention to the
type of lithium button cell (CR2025).
Press the tab
12
on the battery compartment
13
of the remote control toward the centre. Now pull
out the battery compartment
13
. (see Figure 2).
Remove the old battery.
Insert a new 3V-button-cell battery (type CR2025).
Pay attention to the correct polarity.
Push the battery compartment
13
back into the re-
mote control unit until the tab
12
snaps into place.
1
2