Silvercrest 306411, Инструкция по эксплуатации и правила безопасности

Страница: 51 / 200

■ 48
│ GB
│
IE
SCUR 3 A1
Other functions
Display lighting
♦ You can set the brightness of the LED display in three stages. Press the
SNOOZE / DIMMER button to increase or decrease the brightness of
the display in stages.
–
The brightness remains at the currently selected level except for between
the hours of 11 pm and 5 am (night mode).
–
When the device is switched on, the brightest mode is always used.
–
After switching off the device, the display is automatically set to the
lowest brightness after 10 seconds. The display
is restored to the
brightest level for 10 seconds every time a button is pressed.
NOTE
► In standby mode the display is automatically dimmed during the period
from 11 pm to 5 am (night mode). Permanent illumination is not possible in
standby mode during this time.
Sleep function
You can use this function to automatically switch the device off after 15–
90 minutes.
♦ During radio or CD playback, press the SLEEP / NAP button
-
briefly.
"ZZZ" and "15" (minutes) appear on the display .
♦ Press the SLEEP / NAP button
-
repeatedly to set the SLEEP time (15, 30,
45, 60, 90, OFF).
The sleep function is activated after around 5 seconds if no other button is
pressed. As long as the sleep function is activated, "ZZZ" appears on the
display
.
♦ Press the SLEEP / NAP button
- once
while the function is activated to
show the remaining time until the device is switched off.
♦ To deactivate the function, press the SLEEP / NAP button
-
until "OFF"
appears on the display or switch off the device.
NOTE
► If, during CD playback, the CD playback time is less than the set SLEEP
time, the playback is stopped at the end of the CD.