Silvercrest 305856, Руководство по эксплуатации

Страница: 34 / 130

GB
│
IE
│ 31 ■ SAST 18 A1
Cleaning
ATTENTION! PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
Emptying the dirt container and cleaning the filter
NOTE
► To achieve the best results, empty the dirt container % and clean the HEPA
filter 6 regularly.
1) If you have not already done so, disconnect the appliance from the mains
adapter or lift it off the wall bracket .
2) To open the dirt container
%
, press the release button
!
and remove the
dirt container
%
from the appliance.
3) Remove the filter holder 1 together with the HEPA filter 6 from the dirt
container
%
by pulling both straight out of the dirt container
%
.
4) Empty the dirt container % .
5) Remove the HEPA filter
6
from the filter holder
1
by turning it anticlockwise
towards the symbol and pulling it out.
6) Tap out the HEPA filter
6
and the filter holder
1
over a rubbish bin. If nec-
essary, you can rinse out the filter holder 1 and the HEPA filter 6 with fresh
water. Before replacing the parts ensure that they are completely dry. Do not
dry the HEPA filter
6
with hot air.
7) Reinsert the filter holder 1 into the dirt container % . Make sure that the filter
holder 1 is straight and that the rubber lip seals the dirt container % .
8) Insert the HEPA filter
6
into the filter holder
1
so that the catches on the
HEPA filter 6 fit into the corresponding recesses on the filter holder 1 .
The arrow on the HEPA filter 6 must be aligned with the arrow on the filter
holder
1
. Turn the HEPA filter
6
clockwise towards the symbol.
9) Replace the dirt container % on the motor unit . :
–
First, place the contacts on the underside of the dirt container % onto the
contact pins on the underside of the motor unit . . This pushes the two
catches on the motor unit
.
into the recesses on the dirt container
%
.
–
Press the upper side of the dirt container
%
against the upper side of the
motor unit . so that the catch audibly engages. The dirt container % is
now firmly seated on the motor unit . .