Silvercrest 305856, Руководство по эксплуатации

Страница: 29 / 130

■ 26 │
GB
│
IE
SAST 18 A1
Before first use
1) Remove all packaging materials from the appliance.
2) Check whether the filter holder
1
and the HEPA filter
6
are firmly installed
in the dirt container % . They may have worked loose during transport.
To insert the filter holder 1 and the HEPA filter 6 into the dirt container % ,
proceed as follows:
–
The filter holder 1 can only be fitted in the dirt container % in one
position. The side labelled "UP" must be facing upwards. Push the
filter holder
1
as far as possible into the dirt container
%
. Make sure
that the filter holder
1
is straight and that the rubber lip seals the dirt
container % .
–
Insert the HEPA filter
6
into the filter holder
1
so that the catches on
the HEPA filter
6
fit into the corresponding recesses on the filter holder
1
. The arrow on the HEPA filter
6
must be aligned with the arrow
on the filter holder 1 . Turn the HEPA filter 6 clockwise towards the
symbol.
3) Place the dirt container % on the motor unit . :
–
First, place the contacts on the underside of the dirt container % onto the
contact pins on the underside of the motor unit . . This pushes the two
catches on the motor unit
.
into the recesses on the dirt container
%
.
–
Press the upper side of the dirt container
%
against the upper side of
the motor unit . so that the catch audibly engages. The dirt container
% is now firmly seated on the motor unit . .
Information about the batteries
■ The appliance runs on rechargeable lithium-ion batteries. Before using the
appliance for the first time, the batteries must be charged. The charge indi-
cator lamp
3 flashes red during charging. As soon as the batteries are fully
charged, the charge indicator lamp
3
lights up green.
■ If the charge indicator lamp 3 flashes alternately green and red, the
batteries are fully discharged and the appliance will switch off after around
1 minute.